Heard of carbon steel, the use of hydraulic or mechanical shears. silicon steel slitting line cut using a sharp blade to cut the length of the low-carbon steel. One important factor has a direct impact on the quality of low-carbon steel cutting has put in place between a low-carbon steel blade, shears distance settings. If the distance is set to wide, metal bending, rather than cut. When the distance is set to off, shear blade will bind and the blade can break.

1 A measurement of the thickness of the sheet metal of low carbon steel. A piece of metal is round, a series of slots around its edges. Easy to slip on the edge of the low carbon steel plate in the slots of different thickness and slot, do not wobble up and down, you see in the back end of the slot tag specification size.

2 Cut, read the manual you are using a cutting low carbon steel to determine how to set the gap between the shear blades and shears. slitting line will be based on the gap from the sheet metal on metal thickness. For example, the 11 plate is 8 inches thick, so you need to set the blade clearance .125 (1/8 in.).

3 Open the sheet metal shear and carbon steel plate placed on the shears.

4 set after the block of sheet metal cut to the size you need to cut the low-carbon steel.

5 slide shear carbon steel, until you feel the metal to play a back account. Firmly press every corner of the mild steel plate in order to ensure this is to face up to rest after the block.

6 Press the pedal sheet metal cutting length cutting low-carbon steel.

7 Silicon steel cut to length line repeat the process until you have a low-carbon steel cut to the appropriate length and width.